We are thrilled to announce the launch of our latest product rbs P400C+
Designed to replace our trusted P400C, the new P400C+ Two Part Styrene Free Resin Anchor delivers enhanced performance, easier application, and a safer, cleaner formula — making it the perfect choice for a wide range of anchoring and structural applications.
Why Choose rbs P400C+?
rbs P400C+ is an ETA Approved, styrene free, anchoring mortar with Seismic C2 certification. This caters to both cracked and non-cracked concrete under any environmental condition—dry, wet, or flooded— while maintaining consistent bond strengths.
Employing an injection-type anchor system compatible with both galvanized and stainless steel elements like threaded rods or rebars, supports advanced drilling methods such as Hammer Drilling (HD), Diamond Core Drilling (DD), and Dustless Drilling (HDB). Free of styrene and very low in odour, ideally suited for indoor use and confined spaces, offering superior performance and safety.
At Resapol, we are committed to delivering quality products that meet the needs of our customers.
For more information on this product or to place an order, visit our official product page or contact your local depot’s technical sales teams for assistance.
Approvals & Tests
- ETA according to EAD 330499-02-0601 Option 1:
- Cracked & Uncracked Concrete, formerly TR29.
- ETA according to EAD 330087-01-0601 (TR023:
Rebar Connections).
Areas of Use
- Canopies
- Racking
- Boilers
- Machinery
- Bicycle Racks
- Hand Rails
- Safety Barriers
- Balcony Fences
Base Materials
- Cracked and uncracked concrete
- Masonry solid and hollow
- Solid rock
- Autoclaved Aerated Concrete (AAC)
- Hard Natural Stone
- Voided stone and rock
Product Benefits
- Suitable for both cracked and uncracked concrete.
- Styrene Free – low hazard formula.
- Suitable for use with close edge distance and small anchor spacings.
- Installation in dry, wet or flooded conditions, while maintaining consistent bond and product performance.
- Gel and cure times are not affected by the presence of humidity in the drilled holes.
- Non-sag thixotropic formulation for overhead applications without specific accessories.
- Economical: reduced drilling diameters, 22mm for M20 and 26mm for M24; result in significant material and labour savings.
- Variable installation depths from 4 to 20 times the anchor diameter.
- ETA Approved.
- C2 Seismic category – qualification procedure for more demanding structural and non-structural applications via critical tests with pulsating loads on dynamic cracks. Also beneficial for other types of dynamic forces including vibration, high winds and heavy impacts.
- Low odour for better application indoors or in confined spaces.
- Available in 410ml co-axial cartridges.
- Ratio of 10:1 Resin to Curing Component.
For further details application instructions, please refer to the P400C+ Technical Datasheets above, or click on the image to the left to view the product flyer.
P400C+ Strength Without Styrene