Description :

Chemfix Epoxy Wood Stabiliser is a specially designed two-part low
viscosity, solvent free, resin primer which is designed to strengthen
weakened wood fibres by penetrating deep into the wood. EWS is
used as a primer in conjunction with the Epoxy Rapid Cure (ERC10)
or Epoxy High Build (EHB60) systems.
Once the damaged, decayed and discoloured wood has been
removed by use of a suitable cutter tool such as a router or chisel,
then the area to be treated is lightly sanded to ensure excellent
adhesion. The moisture content of the wood should be no greater
than 18% (check using a standard moisture meter) and damp wood
should be allowed to dry naturally, or by way of a hot air gun.
The two components are mixed manually into a separate container,
and thoroughly agitated for one minute. The 2:1 mixing
ratio should be strictly observed. EWS should be applied using a
standard brush and left to cure for 20 minutes. The repair can then
be applied when the EWS is wet or fully cured.

Key Features :

• Solvent Free – suitable for indoors and outdoors
• Excellent Penetration due to the Low Viscosity
• Pre-measured to Volume 2:1 ratio to ensure accurate mix
• High Strength & Durability
• Fast and Simple to Use, Easy to Clean and Store
• Used with both the ERC10 & EHB60 systems
• Repair can be applied when wet or fully cured.