Descriptoin :

The Easi-Fix Neoprene wall tie is the reliable double mechanical precision pre-torqued tie that sets high standards in replacement wall ties. Its unique, special precision limited torque nut combined with the precision modified 304 stainless steel bar provides a fixing system which permits• Rapid continuous fixing to both inner and outer leaf’s
in under ten seconds

• Ensures inner leaf fixes to pre-torqued level before outer leaf engages
• Pre-torque setting reliably produces pull out figures of over 2.5 kilo newtons
• Independent pull testing of the inner leaf after fixing into the wall allows any or every tie to be pull tested on the inner leaf after initial fixing if required
• Can be easily fitted using a power drill for fast, efficient low-cost installation

The combination of the special precision limited torque nut and the precision modified bar means that initial rotations of the nut are inhibited by the bar. This allows the bar to rotate and the inner neoprene sleeve to engage with and tighten onto the inner wall leaf. At the correct pre-designed torque, the in-built resistance offered by the special nut and bar combination is overcome, allowing the nut to rotate down the bar and tighten the outer neoprene sleeve to similarly engage with and tighten into theouter wall leaf.
The quality of fix for the inner leaf can be readily proven by the use of an industry standard pull tester to the bar before the external leaf is fixed. After pull testing has been carried out the outer leaf can be tightened.