Description:

3D corners moulded from EPDM for use in conjunction with illbruck membranes

Application :

• The appropriate width of membrane to suit the window frame thickness and projection from front face of backing wall should be selected, allowing a minimum of 70mm cover onto the window frame and backing wall (see fig.1). If the frame is only 70mm, the cover can be reduced to 50mm minimum.
• If a breather membrane has previously been applied to the backing wall, cut back to the line of the perimeter membrane to enable the latter to be bonded/sealed directly to the backing wall.
• If the ME220 or ME501 Membrane is to be bonded using OT015 or SP525 respectively, the ME241 Corners can be applied before or after the membrane.
• If, however the membrane is supplied with self-adhesive strips or gasket, the corners must be applied after the membrane.