Description:

Lokfix E77 is a two-component Epoxy anchoring material, supplied in 3:1 ratio side-by-side cartridges with a static mixer nozzle. When applied it sets and cures to firmly se-cure a variety of steel fixings into concrete and solid ma-sonry substrates.

Uses:

For concrete (solid, porous and light) and solid masonry.

• Accredited* for use in dry, wet and flooded concrete substrates, internal and external exposure.
• Can be used with cracked concrete
• Fixing of post installed reinforcement
• Anchoring of threaded rod fixings
• Anchoring of internal threaded rod sleeves
• Can be applied to a wide variety of fixing and rebar sizes
• For horizontal, vertical and overhead application
• C1 and C2 seismic resistance*

Advantages:

• High durability: Tested to achieve 100 year design life*
• High Bond strengths for heavyweight fixings or economical design.
• No additional mixing equipment required
• Does not apply expansive force to the substrate
• Fixings can be spaced closer together than mechanical
  anchors
• Enables fixings closer to edges than mechanical anchors
• Low VOC
• Re-usable by replacing sealing cap product may be kept to the end of original shelf life.
• Tested with diamond drilled bore holes*
• Waterproof, protecting the embedded fixing from corro-sion and water penetration into the substrate.
• Extended gel times allow for more complex procedures
• Fire rated up to 2 hours*
• 24 month shelf life
  *consult test data for specific conditions