Mapelastic Zero Part A 24kg
SKU: 096MLZA24
Mapelastic Zero Part A 24kg
Description:
Two-component cementitious mortar, flexible down to -20°C, for waterproofing balconies, terraces, bathrooms, and swimming pools with CO fully offset in the entire life cycle
Advantges :
- Remains flexible at very low temperatures (-20°C).
- 30 years experience and more than 300 million m² of surfaces successfully waterproofed.
- CE-certified product in compliance with EN 1504-2 and EN 14891.
- Protects the surface of concrete from CO2 penetration (carbonation) for more than 50 years.
- Resistant to UV rays.
- 2.5 mm of Mapelastic Zero represents the equivalent of 30 mm of concrete against the aggressive action of chlorides (w/c ratio 0.45).
- May also be applied on existing coverings.
- Compatible with ceramic, mosaic and natural stone coverings.
- Product certified EC1 Plus by the GEV Institute (Gemeinschaft Emissions-kontrollierte Verlegewerkstoffe, e.V.) as a product with very low emission of volatile organic compounds.
Technical Characteristics :
Mapelastic Zero is a two-component mortar based on cementitious binders, fine-grained selected aggregates, special admixtures and synthetic polymers dispersed in water, blended according to a formula developed in MAPEI’s research laboratories. When the two components are mixed together, a free-flowing mix is obtained which may be easily applied, even on vertical surfaces, at a thickness of up to 2 mm in one single coat.
Thanks to the high content and quality of the synthetic resins, the cured layer of Mapelastic Zero remains constantly flexible under all environmental conditions and resistant to the chemical attack of de-icing salts, sulphates, chlorides and carbon dioxide.
Mapelastic Zero has excellent bonding properties to all concrete, masonry, ceramic and marble surfaces, as long as they are sound and sufficiently clean. This property, together with its resistance to the deteriorating effect of UV rays, a characteristic of this product, ensures that structures protected and waterproofed with Mapelastic Zero have a long service life, even if they
are located in areas with particularly difficult climatic conditions, in coastal areas with a saline rich atmosphere or industrial areas where the air is particularly polluted. Mapelastic Zero meets the requirements defined in EN 1504-9 (“Products and systems for the protection and repair of concrete structures – Definitions, requirements, quality control and evaluation of conformity –
General principles for the use of products and systems”) and the requirements of EN 1504-2 coating (C) according to the PI, MC and IR principles (“Surface protection systems for concrete”).
Reviews
-
(0)
-
( )
-
( )
-
( )
-
( )
Only logged in customers who have purchased this product may leave a review.