Description

rbs P400C+ an extra high performance, styrene free, anchoring mortar with ETA and Seismic C2 certification. This caters to both cracked and non-cracked concrete under any environmental condition—dry, wet, or flooded— while maintaining consistent bond strengths. Employing an injection-type anchor system compatible with both galvanized and stainless steel elements like threaded rods or rebars, supports advanced drilling methods such as Hammer Drilling (HD), Diamond Core Drilling (DD), and Dustless Drilling (HBD).

Free of styrene and very low in odour, ideally suited for indoor use and confined spaces, offering superior performance and safety.

Uses

• Canopies 
• Bicycle racks
• Racking
• Hand rails
• Boilers
• Safety barriers
• Machinery

Advantages

• Suitable for both cracked and uncracked concrete.
• Styrene Free – low hazard formula.
• Suitable for use with close edge distance and small anchor spacings.
• Installation in dry, wet or flooded conditions, while maintaining consistent bond and product performance.
• Gel and cure times are not affected by the presence of humidity in the drilled holes.
• Non-sag thixotropic formulation for overhead applications without specific accessories.
• Economical: reduced drilling diameters, 22m for M20 and 26mm for M24; result in significant material and labour savings.
• Variable installation depths from 4 to 20 times the anchor diameter.
• ETA Approved.
• C2 Seismic category – qualification procedure for more demanding structural and non-structural applications via critical tests with pulsating loads on dynamic cracks. Also beneficial for other types of dynamic forces including vibration, high winds and heavy impacts.
• Low odour for better application indoors or in confined spaces.
• Ratio of 10:1 Resin to Curing Component.