Adesilex PG1 Adhesive 6kg

SKU: 096APG1A6

Adesilex PG1 Adhesive 6kg

SKU: 096APG1A6

POA

POA

0 company wide current stock level

Enquire Now

Adesilex PG1 Adhesive 6kg

Description :

Two-component thixotropic epoxy adhesives for structural bonding.

Application :

· Structural reinforcement of beams and pillars by bonding steel (béton plaqué method) or composite material   (e.g. Carboplate) plates to concrete.
· Non-flexible structural bonding of precast concrete elements.
· Sealing injectors and surface damage before injection of Epojet by low-pressure pump.
· Sealing large cracks and repairing joint corners in industrial flooring subject to traffic.
· Bonding fibre-reinforced cement slabs and pipes.
· Waterproofing large size joints by bonding TPE strips (e.g.   Mapeband TPE) to concrete.

Technical Characteristics :

Adesilex PG1 are two-component products based on epoxy resins, selected fine-grain aggregates and special additives according to a formula developed in MAPEI Research & Development laboratories. After mixing Adesilex PG1 (part A) with their hardeners (part B), a thixotropic mix, easy to apply even on vertical structures in thicknesses up to 1 cm in a single layer, is obtained. Once prepared, Adesilex PG1 hardens by chemical reticulation alone in approx. 3 hours, while Adesilex PG2 hardens in 5 hours without shrinkage. They become compounds with exceptional bonding and mechanical strength. Adesilex PG1 and Adesilex PG2 may also be applied on very damp surfaces as long as there is no standing water. The products differ from each other in their working time. Adesilex PG1 is especially suitable for applications in temperatures between +5°C and +23°C, while Adesilex PG2 is recommended for higher temperatures.
Adesilex PG1 meet the requirements defined by EN 1504-9 (“Products and systems for the protection and repair of concrete structures – Definitions, requirements, quality control and evaluation of conformity – General principles for the use of products”) and the minimum requirements claimed by EN 1504-4 (“Structural bonding”).

Adesilex PG1 Adhesive 6kg

SKU: 096APG1A6

POA

POA

0 company wide current stock level

Enquire Now

Reviews

  • (0)
  • ( )
  • ( )
  • ( )
  • ( )
Write a Review Hide

Only logged in customers who have purchased this product may leave a review.