Description :

Flowable cementitious shrinkage compensated expansive grout with high compression strength for anchoring and grouting.

Technical Characteristics :

Mapefill 110 is a pre-blended powdered grout composed of high-strength cement, graded aggregates and special admixtures with an expansive agent formulated by MAPEI Research & Development laboratorieMapefill 110 conforms to the standard C.1.2601, according to the Specification for Highways works and
conforms to the requirements for Highways England, specification for highways works. When mixed with water, Mapefill 110 forms a fluid grout with the capacity to flow into complex spaces. It is not necessary to vibrate the mortar and it does not segregate. It can be used for anchoring works from 10 to 300 mm thick. Thanks to its advanced formulation Mapefill 110 is engineered to avoid cracking in the plastic and hardened phase and develops high early strength at 24hrs and 3 days. If Mapefill 110 is prepared by only adding water, it must be cured under damp conditions.Therefore, to ensure that the expansive properties of Mapefill 110 take place when drying in the open air, especially on hot and windy days when water evaporation is accelerated, 0.25% of Mapecure SRA, a special shrinkage-reducing admixture, may be used to great advantage when added to the mix. Thanks to this special technology, the development of hydration reactions is encouraged, and capillary porosity is reduced, resulting in an increase in mechanical properties, impermeability and durability. Mapefill 110 complies with the principles defined in EN 1504-9 (“Products and systems for the protection and repair of concrete structures: definitions, requirements, quality control and evaluation of conformity. General principles for use of products and systems”) and the minimum requirements of EN 1504-6 for anchoring works.